American Megatrends MAN-759 Manual Do Utilizador

Pegasus PCI Motherboard User’s Guide

Onboard Adapters The Pegasus PCI motherboard has:

• 

two serial ports (J2 and J3),

• 

a parallel port (J8),

• 

an IDE controller on the PCI bus (the primary IDE connector is J11 and
the secondary IDE connector is J9), and

• 

a floppy controller (J4).

The serial and parallel port connectors are described below.

AMIBIOS minimizes conflicts between onboard and offboard I/O devices.

AMIBIOS automatically checks the adapter cards installed in the expansion
slots on the Pegasus PCI motherboard for a hard disk or floppy controller and
serial or parallel ports.

J3 SER1 J2 SER2 J2 and J3 are 9-pin connectors that provide an AT-compatible serial port

interface. Connect the cables supplied with the motherboard to J2 and J3. The
serial port base I/O port address and other serial port settings can be selected
in Peripheral Setup in WINBIOS® Setup.

The J2 and J3 pinout is shown below. 

1

Carrier Detect

6

Data Set Ready

2

Receive Data

7

Request to Send

3

Transmit Data

8

Clear to Send

4

Data Terminal

Ready

9

Ring Indicator

5

Ground

10

CUT PIN

Cont’d