Toshiba EO1-11095 Manual Do Utilizador
6. OUTLINE OF PREPARATION PROCEDURE BEFORE OPERATING THE ECR
EO1-11095
6-4
Installing the Journal Roll
1
6.1 INSTALLING THE RECEIPT/JOURNAL ROLL
Follow Steps 1 to 5 for “Installing the Receipt Roll” on the
preceding pages, except that the paper roll should be placed inner
side holder of the two holders.
preceding pages, except that the paper roll should be placed inner
side holder of the two holders.
2
There are the following two ways of a journal paper feed
procedure.
procedure.
A: Manual installation
B: Installation using the [JF] key
B: Installation using the [JF] key
A: Manual installation
1
Lift the green lever on the journal side.
2
Insert paper from the rear of the printer until the leading
edge of paper comes out by 30 cm.
edge of paper comes out by 30 cm.
3
Insert the leading edge of paper into the slit of the take-up
reel to take up paper two or three times.
reel to take up paper two or three times.
4
Place the take-up reel on the take-up holder.
5
Lower the green lever.
6
Attach the receipt cover.
B: Installation using the [JF] key
1
Insert paper from the rear of the printer until it won’t go no
further.
further.
2
Press the [JF] key to feed paper until the leading edge of
paper comes out by 30 cm.
paper comes out by 30 cm.
3
Insert the leading edge of paper into the slit of the take-up
reel to take up paper two or three times.
reel to take up paper two or three times.
4
Place the take-up reel on the take-up holder.
5
Attach the receipt cover.