Citizen CL-S631 Manual Do Utilizador
37
Printer Operation
Top Menu
Sub Menu
Default
Menu
Remarks
Keyboard Lock
Off
On
Prevents the control panel from affecting
Off
the printer's configuration. (User "lock-out")
Control Code
STD
STD
Selects between the Standard STX control
ALT
code or the "Alternative" code. Sometimes
ALT-2
called "AS400 mode".
Emulation Select
DM4
DMI
Selects DataMax
®
/Zebra
®
compatibility
DM4
DMI: DataMax
®
IClass
DPP
DM4: DataMax
®
400 like
ZPI2
DPP: DataMax
®
Prodigy Plus
®
ZPI2: Zebra
®
Emulation
Emulation Auto
On
On
Selects the detection of Datamax
®
and
Detect
Off
Zebra
®
emulation.
Full Auto
After Print
AutoConfigure
On
On
Optional auto configure
Off
On .... Auto configure effective.
If a peeler unit or auto-cutter is
installed, each mode is automatically
set regardless of the “function select”
setting.
installed, each mode is automatically
set regardless of the “function select”
setting.
Off ... Auto configure ineffective.
When a peeler unit or auto-cutter is
installed but has not been started, it is
off and the operation is selected by
“Function select”.
installed but has not been started, it is
off and the operation is selected by
“Function select”.
Function Select
Tear
Off
Selects the type of options installed and
Tear
adjusts the "paper stop" position accordingly.
Peel On*
For example, the position where the label
Cut On*
stops in "Tear" mode is different to that in
"Peel On" mode.
"Peel On" mode.
Cutter Action*
Backfeed
Backfeed
Cutter operating method setting
Through
Backfeed: it feeds back after each cutting
operation.
Through: when the number copied = n, the
back end of sheet 1 to n-1 passes through,
and the back end of the final page that is a
single sheet is copied and fed back.
operation.
Through: when the number copied = n, the
back end of sheet 1 to n-1 passes through,
and the back end of the final page that is a
single sheet is copied and fed back.
Paper Position
0.00IN
Peel/Cut/Tear Off
The stop position can be fine tuned using
0.00mm
0.00 to 2.00 IN
this menu setting. The general stop position
0.0 to 50.8mm
is selected depending on the "Function"
Peel/Cut/Tear On
selected above.
-1.00 to 1.00 IN
-25.4 to 25.4mm
-25.4 to 25.4mm
Mode/Repeat Key
Disabled
LabelSet
Repeat method selection
LastOne
LabelSet:
Disabled
Reissues multiple labels.
LastOne:
Issues only the final page.
In count case, it issues only 1 label while
continuing.
In count case, it issues only 1 label while
continuing.
Disabled:
Makes the repeat key invalid.
Interface
RS-232C Baud
9600
115200
Sets the baud rate of the serial interface.
57600
• Interface related settings are effective
38400
after the power is turned on again.
19200
9600
4800
2400
9600
4800
2400
Mode Settings
[Datamax
®
Emulation]
* Effective only when the optional unit is attached.