Brother RL-700S Manual Do Utilizador
Specifications
44
Specifications
Item
Details
Display
LED lamps (blue and red)
Print
Printing
Method
Method
Thermal transfer lamination/thermal printing
Print Head
360 dpi, 384 dots
Resolution
TZ, SZ or AL tape: 360 dpi
HG tape, high resolution mode: 360 x 720 dpi (in feed direction)
HG tape, high resolution mode: 360 x 720 dpi (in feed direction)
Speed
TZ, SZ or AL tape: up to 20 mm/sec
HG tape, high-speed mode: up to 40 mm/sec
HG tape, high-speed mode: up to 40 mm/sec
Maximum
Width
Width
27.1 mm
Interface
USB (Ver. 2.0, Full speed)
Power Supply
220-240 V AC, 50/60 Hz (with AC adapter)
Power
Consumption
Consumption
Printing
Approx. 30 W
Standby
Approx. 2 W
Reading
Approx. 2.5 W
Dimensions
135 mm (W) x 190 mm (D) x 130 mm (H)
Weight
Approx. 1.5 kg
Cutter
Full cut and half-cut
*1
*2
*1. Cutter life is approximately 30,000 cuts when using full cut, and 20,000 cuts when using half-
cut.
*2. Half-cut is used only with laminated tape.
RFID Module
Frequency
Band
Band
13.56MHz
Supported
RFID
RFID
I-Code SLI
*3
*4
*3. I-Code SLI is a trademark or registered trademark of NXP Semiconductors (formerly Philips
Semiconductors).
*4. I-Code SLI conforms to ISO/IEC 15693 and 18000-3 standards.
Operating Temperature/
Humidity
Humidity
10°C - 35°C, 20% - 80% RH