Lincoln Electric SVM159-A Manual Do Utilizador

Observe Safety Guidelines

detailed in the beginning of this manual.

If for any reason you do not understand the test procedures or are unable to perform the test/repairs safely, con-
tact the Lincoln Electric Service Department for electrical troubleshooting assistance before you proceed.
Call  1-800-833-9353(WELD).

The machine often “noodle welds”
with a particular procedure.  The
output is limited to approximately
100 amps.

1.  The machine may be trying to

deliver too much power.  When
the average output current
exceeds a maximum limit, the
machine will “phase back” to
protect itself.  Adjust the proce-
dure or reduce the load to lower
the current draw from the Power
Wave machine.

1.  Perform 

the 

2.  The control board may be faulty.

Excessively long and erratic arc.

1.  Check  for  proper  configuration

and implementation of voltage
sensing circuits.

1.  Check the connections between

the voltage sense receptacle
and the control board.  See the
Wiring Diagram.

2.  The control board may be faulty.