Toshiba GA-1190 Manual Do Utilizador

52    Equipment Detection and Printing Check

3

Print a NIC Configuration 
page from this equipment. 
Does this equipment sup-
port the same protocol as 
the network?

Next Step

Ø

Ö

Configure the proper protocol.

4

Change the protocol set-
tings from TopAccess, if 
necessary, and reboot the 
equipment for the changes 
to take effect. Repeat step 
2. Was the device detected?

Next Step

Ø

5

Check the NIC Configura-
tion page. Are the IP 
Address and subnet mask 
settings correct?

Next Step

Ø

Ö

Set up the TCP/IP settings cor-
rectly.

6

Check the router to make 
sure it is not filtering out this 
equipment packets. Is the 
router processing equip-
ment packets correctly?

Next Step

Ø

Ö

Adjust the router settings.

7

Can another computer 
within the same network 
segment detect this equip-
ment?

Next Step

Ø

Ö

Refer to the following section to 
troubleshoot the condition.

8

Check the NIC Configura-
tion page. Is the Unit Serial 
Number part of the device 
name?

Next Step

Ø

Ö

Contact your service representa-
tive.

9

Check link activities on the 
port being used by this 
equipment and the integrity 
of the network cable, hub, 
or switch that connects this 
equipment to the network. 
Replace any network com-
ponents that you can tell or 
suspect are faulty.

Ö