KYOCERA 2540 Manual Do Utilizador

System Menu

3-9

2

Press [S] or [T] to select Default margin width and press [Change 
#]. 

3

Press [S], [T], [W] or [X] to set the margin width. 

4

Press [Close] to save settings or [Back] to cancel settings. The 
display returns to the Copy Default screen. 

Set the border erase default values. The setting ranges are as follows.

For further details about border erase, refer to page 1-14. 

1

Referring to Accessing the Copy Default screen on page 3-2, access 
the Copy Default screen. 

2

Press [S] or [T] to select Default erase width and press [Change #]. 

3

Press [+] or [–] to set the Border (outer edges) and Gutter (middle) 
border widths. 

4

Press [Close] to save settings or [Back] to cancel settings. The 
display returns to the Copy Default screen. 

Limits the number of sets that can be specified for a single copy. Set to 
between 1 - 999 sets. 

1

Referring to Accessing the Copy Default screen on page 3-2, access 
the Copy Default screen. 

2

Press [S] or [T] to select Preset limit and press [Change #]. 

3

Use the numeric keys to specify the preset limit value.

4

Press [Close] to save settings or [Back] to cancel settings. The 
display returns to the Copy Default screen. 

Disable repeat copy or configure repeat copy in the default settings 
mode. The setting items are as follows.

For further details about repeat copy, refer to page 1-25. 

1

Referring to Accessing the Copy Default screen on page 3-2, access 
the Copy Default screen. 

2

Press [S] or [T] to select Repeat Copy and press [Change #]. 

3

Under Function, select [Off] or [On]. 

4

Under Default, select [Off] or [On]. 

Inch models

0

 - 

2" (1/8" increments)

Metric models

0 - 50 mm (1 mm increments)

Function

Off

Prevents the use of repeat copy. 

On

Allows the use of repeat copy. 

Default

Off

Do not enable repeat copy. 

On

Enable repeat copy.