Philips LPF 5135 Manual Do Utilizador
32
Philips · Laserfax 5120 · 5125 · 5135
EN
8 Copier
Loading Documents
Specifications for Documents
Unsuitable Documents!
1
Insert the documents face down into the document
feeder. The lower most document will be fed in first.
You can insert up to 30 documents (80¦g/m2) at a
time.
feeder. The lower most document will be fed in first.
You can insert up to 30 documents (80¦g/m2) at a
time.
2
Push the document guide inwards, so that it lies level
on the documents.
on the documents.
3
Set the desired resolution. You can choose between:
STANDARD (for documents without special features),
FINE (for documents with small print or drawings),
SUPER FINE (for documents with many details) and
PHOTO (for photos). Press f. The configured resolu-
tion appears on the display. Press f again to change
the resolution.
STANDARD (for documents without special features),
FINE (for documents with small print or drawings),
SUPER FINE (for documents with many details) and
PHOTO (for photos). Press f. The configured resolu-
tion appears on the display. Press f again to change
the resolution.
Spaltenumbruch
Specifications for Documents
Width of Documents
140¦–¦218¦mm
Length of Documents
128¦–¦600¦mm
Paper Weight of the
Documents
Documents
60¦-¦90¦g/m²
Capacity
30 page (80¦g/m²)
Manufacturer’s Rec-
ommendation for Op-
timum Operation
ommendation for Op-
timum Operation
A4 · A5 · Letter · Legal
(80¦g/m²
(80¦g/m²
CAUTION!
Unsuitable Documents!
Do not insert any documents into the device
that ...
... are wet, have been edited with correction
fluid, are soiled or have a coated surface.
… that are written on with a soft pencil, with
paint, chalk or charcoal.
… originate from newspapers or magazines
(printing ink).
… that are held together with office or notebook
staples or with tape or glue.
… are pasted with note papers.
… are creased, crumpled or torn.
Do not insert any documents into the device
that ...
... are wet, have been edited with correction
fluid, are soiled or have a coated surface.
… that are written on with a soft pencil, with
paint, chalk or charcoal.
… originate from newspapers or magazines
(printing ink).
… that are held together with office or notebook
staples or with tape or glue.
… are pasted with note papers.
… are creased, crumpled or torn.
Notice
Setting the Resolution for the Copier
There are different levels of resolution avail-
able for copying documents. Select the func-
tion Make Copy Using User-Defined Set-
tings, in order to set the resolution level, (see
also chapter Make Copy Using User-Defined
Settings, page 33).
There are different levels of resolution avail-
able for copying documents. Select the func-
tion Make Copy Using User-Defined Set-
tings, in order to set the resolution level, (see
also chapter Make Copy Using User-Defined
Settings, page 33).
Notice
Set Resolution
You can select the default resolution setting
(also see chapter Set Resolution, page 37).
You can select the default resolution setting
(also see chapter Set Resolution, page 37).
lpf-5120-5125-5135-manual-uk-int-253117544-b.book Seite 32 Mittwoch, 16. Dezember 2009 10:01 10