Panasonic KX-F1000AL Manual Do Utilizador
5
1
1. Installation and Connection
1
Open the paper cassette cover.
¡
When removing the paper cassette from the
unit, lift it up slightly (
unit, lift it up slightly (
A
) and pull it towards
you (
B
).
2
Fan the stack of paper to avoid a paper jam.
3
Insert the paper by aligning the paper edges
with the partition.
with the partition.
¡
Most paper has instructions recommending
the side to print on. Insert the paper with the
print side down.
the side to print on. Insert the paper with the
print side down.
¡
The height of the paper should not exceed
the limit mark on the paper cassette or it
may cause a paper jam.
the limit mark on the paper cassette or it
may cause a paper jam.
4
Push down the opposite edges so they are
secured under the clips.
secured under the clips.
You can use A4 size paper. The paper cassette can hold up to 250 sheets of 75 g/m
2
(20 lb.) paper. Use 60 to
90 g/m
2
(16 to 24 lb.) paper.
PULL UP
PULL UP
UPPER LIMIT
Limit mark
Paper cassette
cover
cover
Partition
Clip
A
B
Correct
Incorrect
Installing the paper cassette
5
Close the paper cassette cover and insert the
paper cassette into the unit until it clicks into
place.
paper cassette into the unit until it clicks into
place.
Note:
¡
Do not insert paper of different thickness into the cassette at same time. This may cause a paper jam.
¡
Avoid extremely smooth or shiny paper that is highly textured. Also avoid paper that is coated, damaged or
wrinkled, or paper with a cotton and/or fiber content that is over 20%.
wrinkled, or paper with a cotton and/or fiber content that is over 20%.
¡
Avoid used paper for double-sided printing.
¡
Do not use paper printed with this unit for double-sided printing with other copiers or printers, or a paper
jam may occur.
jam may occur.