Sierra Wireless 2120028 Manual Do Utilizador
DocTitleHeader
6
2120028
your computer from the drop down menu once you select
Auto Start. You may only have 1 selection which would be
preselected for you.
Auto Start. You may only have 1 selection which would be
preselected for you.
Note: When using the DUN
connection, make sure the IP
Address is set to the local IP
address of the modem.
connection, make sure the IP
Address is set to the local IP
address of the modem.
DUN ‐ Maintain Persistent Connection: When checked,
AceView will continually check the DUN connection to ensure
it is not down. If so, AceView will attempt to connect again.
AceView will continually check the DUN connection to ensure
it is not down. If so, AceView will attempt to connect again.
Tip: If DUN is not installed on your computer for your modem, you
can install it using the Setup Wizard for your modem, also available on
the AirLink web site: http://www.airlink.com.
can install it using the Setup Wizard for your modem, also available on
the AirLink web site: http://www.airlink.com.
Once you have configured the connection settings, click OK.
AceView will connect to your modem.
AceView will connect to your modem.
DUN with Windows 98 and Windows NT
The direct DUN connection from AceView is not available in
Windows 98 or Windows NT. You will need to establish a
Dial‐Up Networking connection first with the modem and
then use the local IP address as above.
Windows 98 or Windows NT. You will need to establish a
Dial‐Up Networking connection first with the modem and
then use the local IP address as above.
AceView Interface Features
Some of the display elements will change depending on your
modem type.
modem type.
Figure 0-5: Example of a Raven X HSDPA
Signal Strength (RSSI)
Cellular Network Type
Connection Statistics
Remote IP Address