RAD Data comm ASM-60 Manual Do Utilizador

Appendix C IR-IP Interface Module

ASM-60 Installation and Operation Manual

C-22 Device

Control

View Error Log Screen

This item of the Device Control submenu is used to view the error log file. This file
logs errors detected in IR-IP for debug and technical support purposes.

Resets Menu

The Resets menu allows you to perform reset of IR-IP, or its interfaces.

This operation can be used to restore normal operation after service is disrupted
by an abnormal condition. Any data stored in the IR-IP buffers is discarded, and

the flow of traffic is temporarily interrupted.

➤ To access the Resets menu:

• From the Device Control menu, type 3.

The following screen appears:

IR_IP

<IR-IP>

S/W Ver. 1.00 31/IR (date)

Quick Setup

Management Access

Advanced Setup

Device Control
.....................................................................

New Software Download

View error LOG

Resets
=====================================================================

1. Reset Device

2. Reset LAN

3. Reset WAN

Press one of the numbers to select or ESC:

Figure C-18. Resets Menu

Reset Device

➤ To restart IR-IP:

• From the Resets menu, type 1.

You will be prompted to confirm the reset operation.

Resetting the device will restart the IR-IP interface module, and therefore traffic flow

is temporarily interrupted, and the Telnet connection is lost.

Reset LAN

➤ To reset the LAN interface:

• From the Resets menu, type 2.

You will be prompted to confirm the reset operation.

This operation restarts the IR-IP LAN controller.

To continue your Telnet session, press any key within 15 seconds following the

confirmation of the reset operation.

Note