Netgear DG834GV Manual Do Utilizador

Connecting the Router to the Internet

1-15

3. Note that the default SSID is NETGEAR.

4. Set the Region. Select the region in which the wireless interface will operate. 

5. Click Apply to save your changes.

6. Configure and test your computers for wireless connectivity:

Program the wireless adapter of your computers to have the same wireless network name 
(SSID) as the ADSL modem wireless router. Check that they have a wireless link and are able 
to obtain an IP address by DHCP from the router.

Unlike wired network data, your wireless data transmissions can extend beyond your walls and 
can be received by anyone with a compatible adapter. For this reason, use the security features of 
your wireless equipment. The ADSL modem wireless router provides highly effective security 
features which are covered in detail in the full reference manual that is available from a link on the 
CD as well as a link in the main menu of your router. Follow the instructions in the full manual and 
in the router help screens to deploy the security features appropriate to your needs.

Note: The SSID of any wireless adapters must match the SSID you configure in the 

ADSL modem wireless router. If they do not match, you will not get a wireless 
connection.

Note: If you are configuring the router from a wireless computer and you change the 

router’s SSID, channel, or security settings, you will lose your wireless 
connection when you click Apply. You must then change the wireless settings 
of your computer to match the router’s new settings.

Warning: Indoors, computers can connect over 802.11g wireless networks at a 

maximum range of up to 300 feet. Such distances can allow for others outside 
of your immediate area to access your network.