Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Motorola
  4. SBG941E
  5. Manual Do Utilizador

Motorola SBG941E Manual Do Utilizador

Download
Página de 78
B 
 
 
 
 
 
Wireless Pages • Installing Wireless Clients 
Motorola SURFboard SBG941 Series Wireless Cable Modem Gateways • User Guide 
63
570280-001-a  
 
Installing Wireless Clients 
Note: Use the SBG941 Installation CD-ROM to set the client security. The passcode is 
located on the 
For each wireless client computer (station), install the wireless adapter by following the 
instructions supplied with the adapter. Be sure to: 
1.  Insert the CD-ROM for the adapter in the CD-ROM drive on the client. 
2.  Install the device software from the CD or the modem. 
3.  Insert the adapter in the PCMCIA or PCI slot or connect it to the USB port. 
4.  Configure the adapter to obtain an IP address automatically. 
You may need to do the following to use a wireless client computer to access the 
Internet: 
Installing Wireless Clients 
If You Performed:  
On Each Client, You Need to Perform: 
Configuring WPA on the SBG941 
Configuring a Wireless Client for WPA or WPA2 
Configuring WEP on the SBG941 
Configuring a Wireless Client for WEP 
Configuring the Wireless Network 
Name on the SBG941 
Configuring a Wireless Client with the Network Name 
(SSID) 
Configuring a MAC Access Control List 
on the SBG941 
No configuration on client required 
Configuring a Wireless Client for WPA 
If you enabled WPA and set a PSK Passphrase by configuring WPA on the SBG941, you 
must configure the same passphrase (key) on each wireless client. The SBG941 cannot 
authenticate a client if: 
• 
WPA is enabled on the SBG941, but not on the client 
• 
The client passphrase does not match the SBG941 PSK Passphrase 
CAUTION 
Never provide the PSK Passphrase to anyone who is not authorized to use your WLAN.