Netgear FVS318N Manual Do Utilizador

Each wireless profile provides the following features:

Capability to turn off the wireless profile during scheduled vacations and office 
shutdowns, on evenings, or on weekends. This a green feature that allows you to save 
energy.

WLAN partitioning to prevent associated wireless clients (using the same wireless profile) 
from communicating with each other. This feature is useful for hotspots and other public 
access situations.

MAC address access control list that lets you add another level of security.

Capability to monitor the clients that are connected to the SSID of the wireless profile.

To set up a wireless profile, specify a name for the profile and the SSID, specify the type of 
security with authentication and data encryption, and specify whether the SSID is broadcast.

 

The wireless VPN firewall is set by default as an open system with no authentication. 
When you configure network authentication, bear in mind that older wireless adapters 
might not support WPA or WPA2. Windows XP, Windows 2000 with Service Pack 3, 
Windows Vista, and Windows 7 do include the client software that supports WPA. 
However, client software is required on the client. Consult the product documentation for 
your wireless adapter and WPA or WPA2 client software for instructions on configuring 
WPA2 settings.

For information about the types of network authentication that the wireless VPN firewall 
supports, see 

 

Select the data encryption that you want to use. The available options depend on the 
network authentication setting described earlier (otherwise, the default is None). The data 
encryption settings are explained in 

on page 115.

Some concepts and guidelines regarding the SSID are:

A basic service set (BSS) is a group of wireless devices and a single wireless access 
point, all using the same wireless profile or service set identifier (BSSID). The actual 
identifier in the BSSID is the MAC address of the wireless radio. (A wireless radio can 
have multiple MAC addresses, one for each wireless profile.)

An extended service set (ESS) is a group of wireless devices, all using the same identifier 
(ESSID).

Different devices within an ESS can use different channels. To reduce interference, 
adjacent devices should use different channels. 

Roaming is the ability of wireless devices to connect wirelessly when they physically 
move from one BSS to another one within the same ESS. The wireless device 
automatically changes to the wireless access point with the least interference or best 
performance.