Netgear FVS318N Manual Do Utilizador
Virtual Private Networking Using IPSec and L2TP Connections
221
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
The Active IPSec SA(s) table lists each active connection with the information that is
described in the following table. The default poll interval is 10 seconds. To change the poll
interval period, enter a new value in the Poll Interval field, and then click the Set Interval
button. To stop polling, click the Stop button.
described in the following table. The default poll interval is 10 seconds. To change the poll
interval period, enter a new value in the Poll Interval field, and then click the Set Interval
button. To stop polling, click the Stop button.
View the Wireless VPN Firewall IPSec VPN Log
To display the IPSec VPN log:
Select Monitoring > VPN Logs > IPSec VPN Logs. The IPSec VPN Logs screen displays:
Figure 138.
Table 50. IPSec VPN Connection Status screen information
Item
Description
Policy Name
The name of the VPN policy that is associated with this SA.
Endpoint
The IP address on the remote VPN endpoint.
Tx (KB)
The amount of data that is transmitted over this SA.
Tx (Packets)
The number of IP packets that are transmitted over this SA.
State
The status of the SA. Phase 1 is the authentication phase, and Phase 2 is key exchange
phase. If there is no connection, the status is IPSec SA Not Established.
phase. If there is no connection, the status is IPSec SA Not Established.
Action
Click the Connect table button to build the connection, or click the Disconnect table
button to terminate the connection.
button to terminate the connection.