Netgear FVS318N Manual Do Utilizador

For SIIT to function, the routing mode needs to be IPv4 / IPv6. NETGEAR’s implementation of 
SIIT lets you enter a single IPv4 address on the SIIT screen. This IPv4 address is then used 
in the IPv4-translated address for IPv6 devices to enable communication between IPv4-only 
devices on the wireless VPN firewall’s LAN and IPv6-only devices on the WAN.



Select Network Configuration > SIIT. The SIIT screen displays:

Select the Enable SIIT check box.

In the SIIT Address fields, enter the IPv4 address that should be used in the IPv4-translated 
address for IPv6 devices.

Click Apply to save your changes.

Configure Advanced WAN Options and Other Tasks

The advanced options include configuring the maximum transmission unit (MTU) size, port 
speed, and wireless VPN firewall’s MAC address, and setting a rate limit on the traffic that is 
being forwarded by the wireless VPN firewall.

Although you can access the Broadband Advanced Options screen 

only through the Broadband ISP Settings (IPv4) screen, the 
advanced options apply to both IPv4 and IPv6 WAN connections.



Select Network Configuration > WAN Settings > Broadband ISP Settings. The 
Broadband ISP Settings screen displays the IPv4 settings (see 

 on page 29).

Click the Advanced option arrow in the upper right of the screen. The Broadband Advanced 
Options screen displays: