Black Box 3600 MODEM Manual Do Utilizador

Página de 270
AT Commands
5-24
Modem 3600
EPROM Check   I
PC software packages may issue the I command to verify the modem 
will support all commands needed by the software package. The modem 
returns ASCII characters representing the model and revision level. To 
request the checksum to be calculated on the EPROM, enter the I1 
command. The modem returns four ASCII characters representing the 
cyclic redundancy check (CRC) in hexadecimal form. Enter the I3 
command to request the product version.
Speaker Volume L
The L commands offer three volume levels. 
Speaker Control   M
The M commands enable or disable the speaker for monitoring purposes.
Command
Operation
I
Request product code
I1
Request EPROM checksum value
I3
Request product version
I4
Returns Motorola V.3600
I5
Last disconnect reason
Command
Operation
L, L1, L2
Speaker volume low
L3
Speaker volume high
Command
Operation
M
Disables the speaker
M1
Disables the speaker while receiving a carrier signal
M2
Speaker always on
M3
Disables the speaker while dialing and after a 
carrier is detected