ONKYO ABX-N300 Manual Do Utilizador
En-
29
Network Setup
—Continued
2
Press the [MENU] button.
3
Use the []/[] buttons to select “Standby
Mode,” and press the [ENTER] button; then
use the []/[] buttons to select “Network,”
and press the [ENTER] button.
Mode,” and press the [ENTER] button; then
use the []/[] buttons to select “Network,”
and press the [ENTER] button.
4
Press the [MENU] button.
5
Use the []/[] buttons to select “Network
Setup,” and press the [ENTER] button.
Wait until the “Connection” indication appears.
Setup,” and press the [ENTER] button.
Wait until the “Connection” indication appears.
6
Use the []/[] buttons to select “Ethernet,”
and press the [ENTER] button.
and press the [ENTER] button.
7
Use the []/[] buttons to select “Enable,”
and press the [ENTER] button.
Processing will be performed, and the system will
restart. Then the network connection will be made.
If it succeeds, the display will indicate “Succeeded”;
if it fails, the display will indicate “Failed.”
and press the [ENTER] button.
Processing will be performed, and the system will
restart. Then the network connection will be made.
If it succeeds, the display will indicate “Succeeded”;
if it fails, the display will indicate “Failed.”
Network connections (Manual)
1
Disconnect the AC adapter, then connect
the Ethernet cable and wait at least ten
seconds before reconnecting the AC
adapter.
the Ethernet cable and wait at least ten
seconds before reconnecting the AC
adapter.
2
Press the [MENU] button.
3
Use the []/[] buttons to select “Standby
Mode,” and press the [ENTER] button; then
use the []/[] buttons to select “Network,”
and press the [ENTER] button.
Mode,” and press the [ENTER] button; then
use the []/[] buttons to select “Network,”
and press the [ENTER] button.
4
Press the [MENU] button.
5
Use the []/[] buttons to select “Network
Setup,” and press the [ENTER] button.
Wait until the “Connection” indication appears.
Setup,” and press the [ENTER] button.
Wait until the “Connection” indication appears.
6
Use the []/[] buttons to select “Ethernet,”
and press the [ENTER] button.
and press the [ENTER] button.
7
Use the []/[] buttons to select “Disable,”
and press the [ENTER] button.
and press the [ENTER] button.
8
Specify the “IP Address,” and press the
[ENTER] button.
Use the []/[] buttons to move the cursor,
and use the []/[] buttons to select numerals. The
following IP addresses can be specified.
[ENTER] button.
Use the []/[] buttons to move the cursor,
and use the []/[] buttons to select numerals. The
following IP addresses can be specified.
Class A:
“10.0.0.0”–“10.255.255.255”
Class B:
“172.16.0.0”–“172.31.255.255”
Class C:
“192.168.0.0”–“192.168.255.255”
9
Specify the “Subnet Mask,” and press the
[ENTER] button.
Enter the subnet mask address provided by your
ISP (typically 255.255.255.0).
Use the []/[] buttons to move the cursor,
and use the []/[] buttons to select numerals.
[ENTER] button.
Enter the subnet mask address provided by your
ISP (typically 255.255.255.0).
Use the []/[] buttons to move the cursor,
and use the []/[] buttons to select numerals.
10
Specify the “Gateway,” and press the
[ENTER] button.
Enter the gateway address provided by your ISP.
Use the []/[] buttons to move the
cursor, and use the []/[] buttons to select
numerals.
[ENTER] button.
Enter the gateway address provided by your ISP.
Use the []/[] buttons to move the
cursor, and use the []/[] buttons to select
numerals.
11
Specify the “DNS Server (Primary DNS,
Secondary DNS),” and then press the
[ENTER] button.
Enter a DNS server address provided by your ISP.
Use the []/[] buttons to move the
cursor, and use the []/[] buttons to select
numerals.
Secondary DNS),” and then press the
[ENTER] button.
Enter a DNS server address provided by your ISP.
Use the []/[] buttons to move the
cursor, and use the []/[] buttons to select
numerals.
Network Setup
Network Info
Standby Mode
Standby Mode
Beep
Standby Mode
Network
Network Setup
Ethernet
Connection
Network Setup
DHCP: Enable