Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Havis-Shields
  4. DS-PAN-103
  5. Folheto

Havis-Shields DS-PAN-103 Folheto

Download
Página de 2
*RECOMMENDED HOLES
FOR MOUNTING WITH
3 SCREWS*
*
RECOMMENDED HOLES
FOR MOUNTING WITH
2 SCREWS*
(4X) 1/4-20 X 5/8" BHCS
(120 +/-10% IN-LBS)
(3X) 1/4-20 X 5/8" BHCS
(120 +/-10% IN-LBS)
*USE 3 SCREWS TO FASTEN
DOCK DOWN IF POSSIBLE*
(MOUNTING BRACKET OF
DOCKING STATION)
(SHEET 1 OF 2)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
DRAWING NUMBER:
1.  REMOVE THE 1/4-20 X 5/8" BHCS HOLDING THE MOUNTING 
BRACKET TO THE REST OF THE DOCKING STATION (THE SCREWS 
IN THE PLASTIC SIDE-MEMBERS ON EACH SIDE OF THE DOCK).  
PULL MOUNTING BRACKET OFF OF DOCKING STATION.  
2.  SET MOUNTING BRACKET ON TOP OF DESIRED SURFACE SO 
THAT 3 OF THE HOLES ON THE MOUNTING BRACKET LINE UP WITH 
3 TAPPED HOLES OF THE MOTION ACCESSORY.  (IF 3 HOLES ARE 
NOT AVAILABLE THEN USE 2.)  SEE *RECOMMENDED HOLES* OF 
THE MOUNTING BRACKET.
3.  FASTEN THE MOUNTING BRACKET TO THE MOTION ACCESSORY 
USING (3X) 1/4-20 X 5/8" BHCS (OR 2 DEPENDING ON AVAILABILITY).
4.  PLACE DOCKING STATION OVER TOP OF MOUNTING BRACKET 
SO THAT THE 2 THREADED HOLES IN EACH FLANGE OF THE 
MOUNTING BRACKET LINE UP WITH THE 2 HOLES IN EACH PLASTIC 
SIDE-MEMBER.
5.  FASTEN THE DOCKING STATION BACK TO THE MOUNTING 
BRACKET USING (4X) 1/4-20 X 5/8" BHCS.
6.  TIGHTEN ALL FASTENERS TO THE INDICATED TORQUE 
RECOMMENDATIONS.
THIS PRODUCT IS USED WITH THE PANASONIC 
CF-28/29/30 TOUGHBOOK COMPUTERS 
(THE FEATURES OF THIS PRODUCT MAY BE LIMITED
DEPENDING UPON THE MODEL OF COMPUTER USED.)
HARDWARE KIT CONTENTS:
REV. DATE
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
DS-PAN-101 
DOCKING STATION
01-30-07
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
D3-0036-IS-G
PRODUCT DESCRIPTION
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
12-07-09
DRAWING NUMBER:
DS-PAN-101
INSTALLATION INSTRUCTIONS:
WARNING:  ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND.  HOWEVER, 
IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND 
DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE 
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY 
DEGRADE OCCUPANT SAFETY.  IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN 
ACCIDENT.  INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS.  COMPUTERS AND 
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE 
OPERATING VEHICLE.
6.6
WWW.HAVIS.COM
1-800-524-9900
F-730-019 REV A