Acer 752 Manual Do Utilizador
34
Chapter 2
DOS Flash Utility
Perform the following steps to use the DOS Flash Utility:
1.
Press F2 during boot to enter the Setup Menu.
2.
Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move
USB HDD to position 1.
USB HDD to position 1.
3.
Execute the FLASH.BAT batch file to update BIOS. Or enter C:\ Flash it bios ver.fd/dc
The flash process begins as shown.
4.
In flash BIOS, the message Please do not remove AC Power Source displays.
NOTE: If the AC power is not connected, the following message displays.
Plug in the AC power to continue.
5.
Flash is complete when the message Flash programming complete displays.
Item S pecificHelp
Use < > or < > to s
elect
a device, then press
<F5> to mo
<F5> to mo
ve it down the
list, or <F6> to mov
e
it up the li
st. Press
<Esc> to
escape the menu
F 1
E S C
E S C
Help
Exit
Exit
Select Item
Select Menu
Select Menu
Change V alues
Select
Select
SubMenu
E n t e r
F 9
F 10
F 10
Setup Default
Save and Exit
Save and Exit
Boot priority order:
1. IDE0 : Hitachi HTS545032B9A300
2. IDE1 :
3. Network Boot : Athero
2. IDE1 :
3. Network Boot : Athero
s Boot Agent
4. USB HDD
5. USB CDROM :
6. USB FDD :
5. USB CDROM :
6. USB FDD :
Boot priority order:
1. IDE0 : Hitachi HTS545032B9A300
2. IDE1 :
3. Network Boot : Athero
3. Network Boot : Athero
s Boot Agent
4. USB HDD
5. USB CDROM :
6. USB FDD :
5. USB CDROM :
6. USB FDD :
F 5 / F 6
InsydeH20 Setup Utility
Information Main
Boot
Exit
Security