Fujitsu 1600 Manual Do Utilizador

Troubleshooting

Infrared Data Transfer Is Not Working

3

If you are experiencing problems transferring data over the pen tablet’s infrared 
interface (IrDA port), check the following: 

• Can the IrDA port on the pen tablet “see” the IrDA port on the other device? There 

must be a direct line-of-sight path between the IrDA port on the Point 1600 pen 
tablet and the IrDA port on the other device. 

• Ensure that you are pointing the IrDA port on the pen tablet at the port on the 

other device. The “viewing angle” from the IrDA port on the pen tablet must not 
be more than 15 degrees from center. 

• Ensure that the pen tablet is close enough to the other device. The distance 

between the two devices must be no more than approximately 3 feet (1 meter). 

• The device that you are trying to communicate with must be compliant with the 

IrDA Standard Revision 1.1 or lower.   If you are unsure, contact your local help 
desk. 

• Your system must be properly configured before the IrDA port can be used. 

Contact your local help desk for assistance if necessary.