Seagate 100716627 Manual Do Utilizador

S

EAGATE 

L

APTOP 

SSHD SATA P

RODUCT 

M

ANUAL

, R

EV

. B

  6

 D

RIVE 

S

PECIFICATIONS 

Recording method

Perpendicular

Recording density 

1894 Kb/in 

Track density 

375 ktracks/in avg

Areal density 

705 Gb/in

2 

avg

Spindle speed 

5400 RPM +/- 0.2%

Sustained data transfer rate 

100 MB/s max

I/O data-transfer rate 

600 MB/s max

 Height

9.5 +/- 0.2 mm (0.374 +/-.008 in)

 Width

69.85 +/- 0.25 mm (2.750 +/- 0.010 in)

 Length

100.35 +0.20 / -0.25 mm (3.951 +0.008 / -0.010 in)

Typical weight

115 g (0.254 lb)

Cache buffer

64MB (65,536 KB)

Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The 
specifications in the table below are defined as follows:



Track-to-track seek time is an average of all possible single-track seeks in both directions.



Average seek time is a true statistical random average of at least 5000 measurements of seeks between random tracks, less overhead.

Power-on to ready (sec)

<1.0

<1.0

Power-on to ready (sec) (SED models)

TBD

TBD

Standby to ready (sec)

<1.0

<1.0

Interface

Serial ATA (SATA)

Track-to-track

2.0

Average

12.0

Average latency

5.6

These drives are designed to consistently meet the seek times represented in this manual. Physical 
seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values. 
However, due to the manner in which these drives are formatted, benchmark tests that include 
command overhead or measure logical seeks may produce results that vary from these specifications.