Toshiba M200 Manual Do Utilizador

Standby will not function under the following conditions:

❑

Power is turned back on immediately after shutting down.

❑

Memory circuits are exposed to static electricity or electrical noise.

Certain conditions require that you reset  the system. For example, if:

❑

You change certain computer settings.

❑

An error occurs and the computer does not respond to your keyboard
commands.

There are three ways to restart the computer system:

1. Press 

 or Windows Security tablet button to display the

, then select 

and 

.

2. Select 

from the 

 window in the start menu.

3.

Slide the power button and hold it down for five seconds. Wait 10 to 15
seconds, then turn the power on again by sliding the power button.

If preinstalled files are damaged, use the Product Recovery CD-ROM to restore
them. To restore the operating system and all preinstalled software, follow the steps
below.

1. Load the Product Recovery CD-ROM in the external optional optical disk drive

and turn off the computer’s power.

2. Hold down the 

 key and turn on the power. When 

 appears, release the 

 key.

3. Use the left or right cursor key to select the CD-ROM icon in the display

menu. For details, refer to the Boot priority section in Chapter 7,

4. Follow the on-screen instructions.