Sony PCG-Z505LS Guia Do Utilizador

VAIO® Z505 SuperSlim Pro™ Notebook User Guide

❑

Click the Advanced button on the General tab, and Confirm the following 
information:

1

Enable Deep Sleep is selected with a checkmark.

2

The message “Standby function is enabled” is displayed. If the message 
reads “Standby function is disabled”, click the Enable button.

3

The message “Hibernation feature is enabled” is displayed. If the 
message reads “Hibernation feature is disabled”, click the Enable 
button.

4

Click OK and restart your notebook.

My system enters System Idle mode when System Suspend mode has been 

selected

❑

If you are connecting an optical disc drive with a PC card, disconnect it by 
stopping the PC card. Use the Sony Notebook Setup utility to disable devices 
that you are not currently using. See “To remove a PC card” on page 44 for 
more information.

❑

Make sure the PC Card is compatible with your notebook’s Windows® 
operating system.

The Power Management setting is not responding

Your notebook’s operating system may become unstable if a lower power state, 
such as system hibernation is initiated and then changed before the notebook 
completely enters the lower power state. To restore the notebook to its normal 
operating stability: 

❑

Close all open applications.

❑

Push and hold the power button for four seconds or longer to shut down 
the notebook.

The sound of my notebook’s fan is too loud

Use the PowerPanel utility to change the Thermal Control Strategy setting to 
Quiet. This setting slows down the CPU speed. See PowerPanel Help for more 
information.

✍

(Windows 2000 only) When the notebook enters and returns from a power saving 

mode after removing the optical drive, the message "Unsafe Removal of Device" may 

appear and the device name is shown listed as "Secondary IDE Channel. Click OK.