Technika SP112iPH Manual Do Utilizador

RADIO FUNCTION:
Select the Radio function from the application menu at the 
bottom of the screen.
The radio screen will be displayed.

Scroll here to tune the radio (108.0 MHz 

1. 

shown in this example)
Touch here to store a station preset

2. 

Touch here to scan for a station

3. 

Scroll here to change the radio volume

4. 

Touch to select a radio preset

5. 

You can now operate many functions of your clock radio from 
the iPhone screen, tuning for stations and storing presets. 
In  addition,  you  can  assign  the  presets  names  for  easier 
selection.

Touch the AUTO icon to scan for stations and store any 

•

stations found in the application preset locations.

NOTE: The presets stored by the application are separate and 
additional to those stored from the control panel.
Manual tuning:

Scroll the frequency wheel to manually tune a station. 

•

The upper half of the wheel sets tuning in 1MHz steps, 
the lower half in 0.1MHz steps.
For example, to tune 105.5MHz, set the upper wheel to 
105, the lower wheel to 5.

Both the iPhone display and the clock radio display will tune.
Storing a station as a preset:
NOTE: If you know the station frequencies of your favourite 
stations, you can enter the frequencies into the application 
and store them as presets before docking your iPhone.

Tune to the station you want to store.

•

Touch the SAVE icon.

•

Choose a preset number to store this station (touch the 

•

M1, M2.... etc icon).

The station will be stored.
NOTE: You  can  scroll  the  preset  bar  to  reveal  more  preset 
numbers (up to 20) if required.
Naming preset stations:
You can name preset stations stored on your iPhone.

Touch the text box below the preset number you want 

•

to rename.

Enter the preset name.

•

APPLICATION SETTINGS:
From  the  Application  setting  screen  you  can  choose  the 
following settings -
Flash  colon:  Set  to ‘ON’  for  a  flashing  colon  on  the  clock 
display.
Brightness:  Set  the  display  brightness  for  the  application 
(useful to make the display dimmer when docked at night).
24 Hour Mode: Set the clock mode to your preference of 24 
hour or 12 hour display.
Temperature unit: Choose to set the temperature display 
units to your preference of Centigrade or Fahrenheit.
Auto-Lock: When set to ‘ON’ with the application running 
the  iPhone  will  lock  automatically  after  1  minute  of 
inactivity. When set to ‘OFF’ the iPhone will not lock while 
the application is running.
NOTE: When Auto-Lock is set to ‘OFF’ the iPhone display will 
stay permanently lit when the application is running.