Avaya EU24 Manual Do Utilizador

Function Key Programming 

Function Keys - Page 31 

IP Office 2420 + EU24 User’s Guide 

Function Keys - Page 31 

40DHB0002UKEG – Issue 4 (9th February 2004) 

Function Key Programming 

Switch call forwarding on/off and set the forwarding number.  
This function can be programmed with or without a target forwarding number. This 
function can be programmed through the phone by the user using an 

 Admin key.  

If programmed with a forwarding number, that number is shown next to CFrwd. 
Pressing CFrwd switches on forwarding to that number.  
If programmed without a forwarding number, when 

 CFrwd is pressed, the user's 

current forwarding number setting is shown. Change the number using the telephone 
keypad and <<< 

 to backspace. When the number set as required press Done 

.  

When call forwarding is on, CFrwd is shown with a   symbol and D (Diverted) is shown 
at the top of the display. To switch call forwarding off, press 

 CFrwd again.  

[User | Digital Telephony | Emulation | Call Forwarding All] 

See also: 
• 

FwNOn - Forward On No Answer On on page 40 

• 

FwUOn - Forward Unconditional On on page 40. 

• 

FwdNo - Forward Number on page 39. 

• 

FwdH+ - Forward Hunt Group Calls On on page 39  

 

Clears the current connected call and connects any waiting call.  This feature is not 
applicable when working with multiple Call Appearance lines. 
This function does not require any data entered when programmed. This function 
cannot be programmed through the phone by the user.  
Pressing 

call. 

[User | Digital Telephony | Advanced | Call | Clear CW] 

  

Allows the extension to join a specified conference.  
This function requires the conference number to be entered when programmed. That 
number is then shown next to CnfRV. This function cannot be programmed through the 
phone by the user.  
Pressing 

 CnfRV places the extension into the specified conference. Note that the 

number of conference parties allowed at any time is determined by the telephone 
system. 

[User | Digital Telephony | Advanced | Call | Conference Meet Me] 

 

Places all calls held by the extension into a conference.  
This function does not require any data entered when programmed. This function 
cannot be programmed through the phone by the user.  
Pressing 

 Conf+ places the extension and any calls it has put on hold into a 

conference. This function will not work if the extension has a current call.  

[User | Digital Telephony | Advanced | Call | Conference Add]