ArtDio IPS 1000 Manual Do Utilizador

                                                                       

      IPS 1000 Series VoIP Gateway

 

 

12

Cut off the conductor outside the edge to avoid from 

causing the circuit shortage 

 

You need to prepare the following information before installing the gateway. 

The gateway requires an IP address for operation. Before installation you need to know how to obtain an 

IP address from your local ISP. Static IP, DHCP or PPPoE can be used. The following table helps you to 

decide what information you need. If your ISP offers static IP, you may need to obtain an IP from MIS 

personnel in order to prevent an IP conflict. Otherwise DHCP (most cable broadband providers offer this) 

and PPPoE (most ADSL broadband providers offer this) will work fine. 

 

IP Environment   

Requiring information 

Public IP 

Address 

IP Address 

Subnet Mask 

It is strongly suggested that you obtain an 

IP address from MIS personnel in order to 

prevent an IP conflict. 

Static IP 

Private IP 

Address 

IP Address 

Subnet Mask 

Default Gateway 

It is strongly suggested that you obtain an 

IP address from MIS personnel in order to 

prevent IP conflicts. 

Your private IP requires an IP Sharing 

device and you must configure the IP 

Sharing device to treat the IPS unit and the 

IP that it is using as a virtual server.   

Dynamic IP address (DHCP) 

DHCP mode