APM -201 Folheto
1 of 1
APM CO., LTD
APM-201
Base Unit for Power Over Ethernet
1. Features:
1.1. Single-Port Power Injector
1.2. IEEE 802.3af compliant
1.3. No Software Required
1.4. Easy to Install
1.5. Use Existing Ethernet Cable
1.2. IEEE 802.3af compliant
1.3. No Software Required
1.4. Easy to Install
1.5. Use Existing Ethernet Cable
2. Input Specifications:
2.1. Power Interface : DC Jack (See Pin Assignment)
2.2. Data Interface : RJ-45 jack (See Pin Assignment)
2.3. Input Voltage : 48V ± 10 % * Applied from External Switching Adapter ( 90 ~ 264Vac)
2.4. Input Current : 400 mA Max.
2.2. Data Interface : RJ-45 jack (See Pin Assignment)
2.3. Input Voltage : 48V ± 10 % * Applied from External Switching Adapter ( 90 ~ 264Vac)
2.4. Input Current : 400 mA Max.
3. Output Specification:
4. General Specification:
3.1. PD Detection & Classification :
4.1. Operating Temperature : 0℃ ~ +50℃
IEEE 802.3af compliant
4.2. Storage Temperature : -20℃ ~ +70℃
3.2. Interface : RJ-45 jack (See Pin Assignment)
4.3. Humidity : Up to 90 %
3.3. Output Voltage : 48V ± 10 %(42,53)
4.4. Cooling : Free air convection
3.4. Output Current : 0.35 A Max.
3.5. Output Power : 15.4W Max.
3.6. LED Display : PoE Not Active (Orange), PoE Active (Green)
3.5. Output Power : 15.4W Max.
3.6. LED Display : PoE Not Active (Orange), PoE Active (Green)
5. Pin Assignment :
Pin
LAN IN
LAN Out
Pin
1
Tx (+) Tx
(+)
1
2
Tx (-) Tx
(-)
2
3
Rx (+) Rx
(+)
3
4
N.C. +48V
4
5
N.C. +48V
5
6
Rx (-) Rx
(-)
6
7
N.C. GND 7
8
N.C. GND 8
6. Mechanical Dimension :
Units : m/m & Tolerance : 0.xx ± 0.25
1F, No.49, Alley 24, Lane 75, Sec 3, Kang-Ning Rd, Nei-Hu Dist,
Taipei 114, Taiwan, R.O.C.
www.apm.com.tw apm.sales@msa.hinet.net Tel: +886 2 26335543 Fax: +886 2 26330472