Cisco Systems NSS3000 Series Manual Do Utilizador
Accessing the Network Storage
Mac Users
NSS3000 Series Network Storage System Getting Started Guide
24
4
STEP 5
When the Login window appears, enter your username and password. If your user
profile is set up locally (through the NSS configuration interface and not through
the ADS or NTv4 domain) and the NSS is joined to a domain, enter the following:
profile is set up locally (through the NSS configuration interface and not through
the ADS or NTv4 domain) and the NSS is joined to a domain, enter the following:
<NSS hostname>\<user name>
If the NSS is not joined to a domain, only enter the username.
STEP 6
Depending on your share privileges, you can begin using the NSS storage.
Accessing Storage through FTP
NOTE
Before an end user can access the shares on the NSS through FTP, the NSS must
have FTP access enabled and the individual share must be set up to allow FTP
access.
have FTP access enabled and the individual share must be set up to allow FTP
access.
To access the NSS storage using FTP:
STEP 1
Open your FTP client application.
STEP 2
Click Connect.
STEP 3
From your FTP client application, connect to the NSS. Enter the IP address or
hostname of the NSS. For more information about using your FTP client
application, refer to its documentation.
hostname of the NSS. For more information about using your FTP client
application, refer to its documentation.
STEP 4
Enter your username and password when prompted by your FTP client.
STEP 5
When your FTP client has logged in, a list of accessible shares appears as
individual directories.
individual directories.
STEP 6
Depending on your share privileges, you can begin using the NSS storage.