Cisco Systems 57712 Manual Do Utilizador

Purpose

Command or Action

Enters the host Fibre Channel interface command
mode for the specified vHBA.

Server /chassis/adapter # scope host-fc-if
{fc0 | fc1 | name}

Step 3

Enters the persistent binding command mode for
the vHBA.

Server /chassis/adapter/host-fc-if # scope
perbi

Step 4

Disables persistent binding for the vHBA.

Server /chassis/adapter/host-fc-if/perbi #
set persistent-lun-binding disable

Step 5

Commits the transaction to the system
configuration.

Server /chassis/adapter/host-fc-if/perbi #
commit

Step 6

This example disables persistent binding for a vHBA:

Server#

scope chassis

Server /chassis #

scope adapter 4

Server /chassis/adapter #

scope host-fc-if fc1

Server /chassis/adapter/host-fc-if #

scope perbi

Server /chassis/adapter/host-fc-if/perbi #

set persistent-lun-binding disable

Server /chassis/adapter/host-fc-if/perbi *#

commit

Server /chassis/adapter/host-fc-if/perbi #

Rebuilding Persistent Binding

Before You Begin

Persistent binding must be enabled in the vHBA properties.

Procedure

Purpose

Command or Action

Enters the chassis command mode.

Server# scope chassis

Step 1

Enters the command mode for the adapter card at the
PCI slot number specified by index.

Server /chassis # scope adapter index

Step 2

The server must be powered on before you
can view or change adapter settings.

Note

Enters the host Fibre Channel interface command
mode for the specified vHBA.

Server /chassis/adapter # scope
host-fc-if {fc0 | fc1 | name}

Step 3

Enters the persistent binding command mode for the
vHBA.

Server /chassis/adapter/host-fc-if #
scope perbi

Step 4

Rebuilds the persistent binding table for the vHBA.

Server /chassis/adapter/host-fc-if/perbi
# rebuild

Step 5

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01

Managing Network Adapters

Rebuilding Persistent Binding