Cisco Systems 57712 Manual Do Utilizador
What to Do Next
To activate the new firmware, see
Activating Adapter Firmware, on page 131
.
Activating Adapter Firmware
While the activation is in progress, do not:
Important
• Reset, power off, or shut down the server.
• Reboot or reset CIMC.
• Activate any other firmware.
• Export technical support or configuration data.
Before You Begin
You must log in with admin privileges to perform this task.
Procedure
Purpose
Command or Action
Enters the chassis command mode.
Server# scope chassis
Step 1
Activates adapter firmware image 1 or 2 on the adapter
in the specified PCI slot.
in the specified PCI slot.
Server /chassis # activate-adapter-fw
pci-slot {1 | 2}
pci-slot {1 | 2}
Step 2
The changes will take effect upon the next
server reboot.
server reboot.
Note
This example activates adapter firmware image 2 on the adapter in PCI slot 1:
Server#
scope chassis
Server /chassis #
activate-adapter-fw 1 2
Firmware image activation suceeded
Please reset the server to run the activated image
Server /chassis #
Please reset the server to run the activated image
Server /chassis #
What to Do Next
Reboot the server to apply the changes.
Resetting the Adapter
Before You Begin
You must log in with admin privileges to perform this task.
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
OL-28893-01
131
Managing Network Adapters
Activating Adapter Firmware