Boca Research 2x2 Manual Do Utilizador

The IO Turbo Series adapter is simple and quick to install—
even for the novice computer user. Take a few moments to
read over the directions before you begin.

1. Remove your system cover, remembering to power down

your system first. You may find it necessary to remove other
adapter boards or detach cables. If so, make note of where
everything goes. Now, select an empty 16-bit expansion slot.
Choose either depending on convenience. Remove the
screw and the metal plate that covers the external access to
the slot you have selected.

Before
inserting the
card, check the
jumper
marked J12

. Its

default setting
is software

.

, the J12 jumper must be set to either Normal

or High-speed. Note that if you set the adapter to high-speed mode,
make sure Communication Port Settings (bits per second) are set to
one-fourth of the actual speed desired (e.g., 9600bps will yield
38400bps). Note: 

a serial mouse will not work on the serial ports when

the board is set to high-speed mode. For additional information on
Windows NT installation, refer to Appendix B in this manual.

9361.p65

2/11/99, 11:02 AM

15