Boca Research 10/100 Manual Do Utilizador
EtherFast
®
10/100 LAN Cards
19
Network Component Configuration
1. Once you are back at the Windows 95 desktop, click on your taskbar's
Start button, then Settings, then Control Panel, and then double-click
the Network icon.
the Network icon.
2. The Network window will appear (next page). Click on the
Configuration tab. A window similar to the one below will appear. There
may be other components listed in addition to the ones shown below (for
example, Dial-up Adapter), which is normal. If
any of the components shown below are miss-
ing, however, you’ll need to manually install
them. If that’s the case, refer to Manually
Installing the Network Components on page 60
now.
may be other components listed in addition to the ones shown below (for
example, Dial-up Adapter), which is normal. If
any of the components shown below are miss-
ing, however, you’ll need to manually install
them. If that’s the case, refer to Manually
Installing the Network Components on page 60
now.
• Client for Microsoft Networks
• Linksys LNE100TX Fast Ethernet Adapter
• Linksys LNE100TX Fast Ethernet Adapter
(LNE100TX v4)
• IPX/SPX-compatible Protocol
• NetBEUI
• TCP/IP
• NetBEUI
• TCP/IP
N
No
otte
e:: If you need to install
the TCP/IP Protocol, con-
tact your system adminis-
trator or ISP, or refer to the
Windows 95 documenta-
tion. If D
tact your system adminis-
trator or ISP, or refer to the
Windows 95 documenta-
tion. If D
DH
HC
CP
P error mes-
sages appear during boot
up, this is a TCP/IP error.
Linksys does not provide
technical support for the
configuration or trou-
bleshooting of the TCP/IP
protocol.
up, this is a TCP/IP error.
Linksys does not provide
technical support for the
configuration or trou-
bleshooting of the TCP/IP
protocol.
LNE100TX v4 test doc.qxd 3/22/00 4:12 PM Page 19