Boca Research 10/100 Manual Do Utilizador

Linksys EtherFast Series

Novell Client32 Setup for

Windows 95 and 98

You must install Novell Client32 drivers connecting to a 4.x
or 5.0 server while in Windows 95.

If you are using Windows 98, you must obtain the latest version of Client32.
The installation is very similar to that of Windows 95 OSR2. Follow the
OSR2 (version B) instructions below. When asked for the location of the driv-
ers, specify a:\client32 on the EtherFast 10/100 LAN Card Driver Disk.

Before you begin, obtain the Client32 disks or CD-ROM from Novell. You
may be able to download a copy of the disk(s) from Novell's web site. 

Follow the directions below to ensure that your PC is prepared to have Novell
Client configured to the EtherFast Card. 

1.  If Novell's Client32 drivers are already installed on your PC, complete the

following to remove any network adapter settings that may conflict with
the EtherFast card: Click on Start, then Settings, then Control Panel,
and then double-click on the Network icon. If you see any network
adapters listed in the box, remove them. Remove all floppy disks from
your computer and reboot.

2.  If you have not installed Novell's Client32 drivers onto your computer,

run the Client32 SETUP.EXE program. When the program appears, click
Yes, followed by Start to begin the installation. When Setup is finished
copying files to your system, reboot. 

There are currently two versions of Windows 95.

• Version A 
• A later release also known as OSR2, or version B 

38

N

No

otte

e::  Novell

Client 3.x setup
can be found on
page 53. 

LNE100TX v4 test doc.qxd  3/22/00  4:14 PM  Page 38