Cabletron Systems WPIM-RT1 Manual Do Utilizador
WPIM-RT1 User’s Guide
3-1
CHAPTER 3
LOCAL MANAGEMENT
This chapter explains how to configure the WPIM-RT1 through Local
Management for T1 service on the CSX400 or the HSIM-W6. Refer to
the Cabletron Systems HSIM-SSA710 User’s Guide for information on
Local Management for the HSIM-SSA710.
Management for T1 service on the CSX400 or the HSIM-W6. Refer to
the Cabletron Systems HSIM-SSA710 User’s Guide for information on
Local Management for the HSIM-SSA710.
The WAN Physical Configuration screen and the WAN Interface
Configuration screen appear as Local Management menu selections
when you install the WPIM-RT1 into a host module. Refer to the host
platform User’s Guide for instructions about how to set up and access
Local Management.
Configuration screen appear as Local Management menu selections
when you install the WPIM-RT1 into a host module. Refer to the host
platform User’s Guide for instructions about how to set up and access
Local Management.
Sections of this chapter include:
•
The WAN Physical Configuration screen,
•
The WAN Interface Configuration screen,
•
Full T1 Configuration using PPP (Point-to-Point Protocol),
•
Fractional T1 Configuration using PPP,
•
Frame Relay Configuration,
WPIM-RT1 Local Management screens for T1.
through
provide examples for setting up the WPIM-RT1 for full or
fractional T1 in a PPP environment, or for configuring the WPIM-RT1 for
Frame Relay in the T1 mode.
Frame Relay in the T1 mode.
TIP
Navigate through the WPIM Local Management Screens by
using the following keyboard commands:
using the following keyboard commands:
Arrow keys to move up, down, right or left within the screen.
SPACE bar to toggle between selections in a field.
ENTER (RETURN) to implement a selection.