Sanyo POA-MD13NET2 Manual Do Utilizador
37
Network Board
OWNER’S MANUAL
ENGLISH
The icons [A] , [B] and [C] represent the sensors located in the projector as follows:
[A]: Surrounding temperature of the projector*
[A]: Surrounding temperature of the projector*
1
[B]: Internal temperature of the projector
[C]: Internal temperature of the projector*
[C]: Internal temperature of the projector*
2
*
1
The indicated peripheral temperature of the projector is a little higher than actual surrounding tem-
perature.
perature.
*
2
Sensor C icon may not indicated depending on the projector's model type.
Check the status of projector
Items
Description
Lamp Mode ....................Displays 2 lamps or 4 lamps mode and lamp status as below icons with
Lamp1/Lamp2/Lamp3/Lamp4 order.
Accumulated
Lamp-use Time ..............Displays the accumulated lamp use time in hour units (h) and displays each
Lamp-use Time ..............Displays the accumulated lamp use time in hour units (h) and displays each
time with Lamp1/Lamp2/Lamp3/Lamp4 order.
Accumulated
Projector-use Time ..........Displays the accumulated projector use time in hour unit (h).
Power Status ..................Displays the status of the lamp.
Projector Condition* ........Displays the status of the projector's power.
Projector-use Time ..........Displays the accumulated projector use time in hour unit (h).
Power Status ..................Displays the status of the lamp.
Projector Condition* ........Displays the status of the projector's power.
* When occurring the internal power failure, The word “Power Failure” and error
information is displayed.
Input Status ....................Displays the selected input.
Selection..........................Displays the selected input mode.
Signal Status ..................Displays the signal status of the selected input mode.
Inside temperature ..........Displays the internal temperature of the projector. The icons [A], [B], [C] on
Selection..........................Displays the selected input mode.
Signal Status ..................Displays the signal status of the selected input mode.
Inside temperature ..........Displays the internal temperature of the projector. The icons [A], [B], [C] on
the page represent the thermal sensors*
2
located in the projector. If the tem-
perature at one of those sensors exceeds specified temperature, the appear-
ance of its icon changes to the following alert icon to let users know about
the abnormal temperature. Please check surrounding temperature of the pro-
jector, check for clogged air filters and check area surrounding the ventilation
fans.
ance of its icon changes to the following alert icon to let users know about
the abnormal temperature. Please check surrounding temperature of the pro-
jector, check for clogged air filters and check area surrounding the ventilation
fans.
Check the status of projector
In the “Power & Status” page, you can control the projector power, and also you can
check the status of the projector as follows. To change the page, click on the page
number linked text.
check the status of the projector as follows. To change the page, click on the page
number linked text.
Yellow
....................Normal
Gray
....................Off
Red
....................Lamp replacement required
Gray with X
....................Abnormality of the lamp