8e6 Technologies ProxyBlocker Manual Do Utilizador
G
LOBAL
A
DMINISTRATOR
S
ECTION
C
HAPTER
1: S
YSTEM
SCREEN
154
8
E
6 T
ECHNOLOGIES
, P
ROXY
B
LOCKER
U
SER
G
UIDE
Configuration
Set up Blocking Criteria
1. At Reset the X-Strike count upon authentication, “Off”
is selected by default. To have all strikes reset before an
end user is authenticated, click “On”.
end user is authenticated, click “On”.
2. Enter the Maximum Strikes Before “Locking” the
Workstation. This is the number of attempts a user can
make to access an unacceptable site before that user is
prevented from using the Internet. The default is 5, and
the maximum limit is 1000.
make to access an unacceptable site before that user is
prevented from using the Internet. The default is 5, and
the maximum limit is 1000.
3. Enter the Time Span in Minutes to Track the No. of
Strikes Within Category. This is the amount of time
between a given user's first strike and the strike that will
lock out that user from his/her Internet access. The
default setting is 5, and the maximum limit is 1440
minutes (24 hours).
between a given user's first strike and the strike that will
lock out that user from his/her Internet access. The
default setting is 5, and the maximum limit is 1440
minutes (24 hours).
4. Enter the number of seconds for the Flood Tolerance
Delay, which is the maximum amount of time that will
elapse before a user who accesses the same inappro-
priate URL will receive another strike. The default setting
and the maximum limit is 4 seconds.
elapse before a user who accesses the same inappro-
priate URL will receive another strike. The default setting
and the maximum limit is 4 seconds.
5. Specify the “Locked” Life Time (Measured in
Minutes), which is the number of minutes a user's work-
station will be locked. Choose either “Unlimited”, or
“Defined”.
station will be locked. Choose either “Unlimited”, or
“Defined”.
If “Defined” is selected, enter the number of minutes in
the text box. The default setting is 5.
the text box. The default setting is 5.
6. Specify a Redirect URL to be used when the end user is
locked out from his/her workstation. By default, “Default
"Alternate" Locked Block Page” is selected, indicating
that the standard lock out block page will display.
"Alternate" Locked Block Page” is selected, indicating
that the standard lock out block page will display.