8e6 Technologies ProxyBlocker Manual Do Utilizador
G
LOBAL
A
DMINISTRATOR
S
ECTION
C
HAPTER
1: S
YSTEM
SCREEN
76
8
E
6 T
ECHNOLOGIES
, P
ROXY
B
LOCKER
U
SER
G
UIDE
Specify Network Time Protocol Servers
In the Details frame, three NTP server IP addresses display
by default in the Servers list box. These IP addresses are:
128.59.35.142, 142.3.100.15, and 129.132.98.11.
by default in the Servers list box. These IP addresses are:
128.59.35.142, 142.3.100.15, and 129.132.98.11.
NOTE: Any IP address following the first entry in the Servers list
box is only used in the event that the ProxyBlocker cannot access
the primary time NTP server specified. IP addresses are used in
the order in which they display in the list box.
box is only used in the event that the ProxyBlocker cannot access
the primary time NTP server specified. IP addresses are used in
the order in which they display in the list box.
Add an NTP Server
To add an NTP server:
1. Enter the IP address in the NTP Server field.
2. Click Add to include this IP address in the Servers list
box.
3. Click Apply to apply your settings.
Remove an NTP Server
To remove an NTP server:
1. Select the IP address from the Servers list box.
2. Click Delete.
3. Click Apply to apply your settings.
WARNING: If using the ProxyBlocker with the 8e6 Technologies
Enterprise Reporter unit, be sure the ER unit is connected to the
same NTP servers as the ProxyBlocker.
Enterprise Reporter unit, be sure the ER unit is connected to the
same NTP servers as the ProxyBlocker.