Sanyo POA-LN02 Manual Do Utilizador

 

When you connect a monitor to a network, the network number of monitor must be the 
same as the network you intend to connect. You should configure monitors network first.
Make sure that the monitor is connected to the network correctly. To configure the net-
work, use the computer. Refer to the chart below.

Configure the network with computer

Temporarily set up the computer's 

network with the default network 

number of the LD-Net Organizer.

Restart the Computer, if required

Using the web browser and login to 

the setting page of the LD-Net 

Organizer by accessing the default 

IP address.

Change the network address you 

want to connect to the existing 

network through the setting menu 

on the browser.

Restart the LD-Net Organizer

Reset to the computer's original 

network configuration.

Completing the network configuration. Perform the basic 

setting  and  operation  of  the  monitor  by  using  the  web 

browser.  Please  see  chapter  "3:  Basic  Setting  and 

Operation" on page 29 for further information.

Please see further 

informatin on pages 

22-25.

Please see further 

informatin on pages 

30-37.

Example of computer's configuration

IP Address : 192.168.0.5

Subnet Mask : 255.255.255.0

Default Gateway : (blank)

DNS : (blank)

Default Network Address of the 

LD-NetOrganizer

IP Address : 192.168.0.2

Subnet Mask : 255.255.255.0

Default Gateway : 0.0.0.0

DNS : 0.0.0.0

Example of monitor's configuration

IP Address : 192.168.1.201

Subnet Mask : 255.255.255.0

Default Gateway : 192.168.1.1

DNS : 0.0.0.0

p.22