Sanyo POA-LN02 Manual Do Utilizador

 

  Click Network Capture 3 icon on the task bar.

  Click "Parameter set up" on the popup menu. The set-

ting window will appear.

  Set Capture Port and PiN code to match to the 

monitor’s port number and Network PIN code.

   To check the Capture Port number,  see item "Control by 

the web browser" (  p.70). To check the PIN code, see 

item "Network PIN code setting" (  p.35).

  Specify the port number of TCP/IP. The default port set-

ting is 9000. There are some reserved port numbers and 

also some applications may use their own port numbers. 

If one of those port numbers is used, the alert dialog 

window will appear and let you know that it is an invalid 

port number. In this case, use another port number.

  The reserved port numbers are http (80), ftp (21), telnet 

(23), etc. The port no. 4352, 10000, 10001 are reserved to 

control the monitor through the LAN port.

  Click search button to list up the available IP address 

assigned to the monitor and select desired IP address you use, or you can enter the IP 
address or host name manually if you know that IP address or host name.

   It may not find any address over the router. Consult your network administrator for further 

details.

 Set the quality of the image.

Quality: Selects from High, Mid, Low

Image Scaling

:

 If checked, the screen image size of the computer is automatically adjusted to the 

monitor’s screen size.

 Set capture start time in second unit.

  This is effective in the communication mode only. It sets up the time period from executing 

the command "Capture transfer" to capturing and transferring the actual screen image. 0 to 60 

seconds can be set.

 Click ok button to close the setting window.

Start real time capture .................. Starts the real time capturing. (  p.68) The screen image of the computer is 

displayed on the monitor in real time.

Start communication .................... Starts the Network Communication. (  p.71) Captured image is displayed 

on the monitor. The captured image edit window appears on the computer 

screen.

Parameter set up ............................ Sets the communication parameter between the computer and network 

unit of the monitor. For further information, see item "Parameter set up" 

below.

Version information ....................... Displays the version of this software.

Shut down ...................................... Quits the application.

Quality  :  Quality mode of the captured image shows following JPEG compression mode.;

High 

: JPEG low compression mode

Medium : JPEG medium compression mode

Low 

: JPEG high compression mode