Siemens SS1021 Manual Do Utilizador

1.  This screen shows you the status of your current connection. Click Re-Scan to 

search for a wireless connection (the adapter will search for the connection 
automatically when it is activated).   

 

 

 
2. Select the “Configuration” tab. The profile setting allows you to save 

configurations in different profiles for different working environments. The default 
profile will contain the initial configuration setting when you install the Card. Under 
the  Operating Mode drop-box, you may choose either Infrastructure or Ad-Hoc. 
The Infrastructure mode allows a wireless adapter to communicate with a wired 
network employing an Access Point, while the Ad-Hoc mode allows 
wireless-to-wireless, peer-to-peer communication. If you choose Infrastructure, the 
SSID should have the same name as the Access Point. If you choose Ad-Hoc, all 
clients should share the same SSID name. You may also select which Transfer 
Rate you wish to use: 1, 2, 5.5, 11Mbps or Auto Rate. Under Power Saving 
Mode, you can select Enabled to allow your adapter to go to sleep mode while the 
adapter doesn’t detect any data transmission. Or select Disabled to make the 
adapter never go to sleep mode. Click Apply to save the settings.