Panasonic ET-MD77NT Manual Do Utilizador

ET-MD77SD3

HD-SDI/SD-SDI Board for DLP™ Projector

S P E C F I L E

As of December 2006

204

(8-1/32˝)

214

(8-7/16˝)

(1-1/4˝)

Specifications

Power supply:

Provided from the DLP™ projector

Power consumption:

Projector power consumption increases approximately 10 W

Terminals:

Serial input:

BNC x 1
4:2:2 digital serial component signal: SMPTE 259M compliant,
480i, 576i
HD digital serial component signal: SMPTE 292M compiant,

720/60p, 720/50p, 1035/60i, 1080/60i, 1080/50i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p

Serial output:

BNC x 1, active through

LAN:

RJ-45 x 1, 10Base-T/100Base-TX for network connection

Dimensions (W x H x D):

204 x 32 x 214 mm (8-1/32˝ x 1-1/4˝ x 8-7/16˝)

Weight:

290 g (10.2 lbs.)

Operating temperature:

0°C – 40°C

Operating humidity:

10% – 80% (no condensation)

NOTE:

Use connection cables of 5CFB or higher (ex. 5CFB, 7CFB, 5CFTX, etc.).
720/50p signals can be input only when this unit is used with the PT-DW10000, PT-D10000,
PT-DW7000 or PT-D7700.

Weights and dimensions shown are approximate.

Specifications subject to change without notice.

DLP and DLP logo are trademarks of Texas Instruments.

This board is designed for use with the DLP™ projectors. It enables the input of a HD digital serial component
signal (SMPTE292M-compliant). Remote control of the projector is also possible from an external computer
connected via LAN.

NOTE: Please use the module only on the specified Panasonic DLP™ projector.

Dimensions

unit: mm

(Dimensions given in inches are approximate.)

Note: This illustration is not drawn to scale.