Toshiba MDB-100 Manual Do Utilizador
18
The response delay timer value is read only upon MDB-100 initialization, requiring
the unit to be reset if the value is changed for the new value to take effect. This
setting is also non-volatile (written to the MDB-100’s EEPROM). Therefore, do not
write to this register more than 100,000 times.
the unit to be reset if the value is changed for the new value to take effect. This
setting is also non-volatile (written to the MDB-100’s EEPROM). Therefore, do not
write to this register more than 100,000 times.