Sony STRDG720 Manual Do Utilizador

• A digital audio signal transmitted by HDMI 

can be output from the speakers connect to 
this receiver. This signal supports Dolby 
Digital, DTS, and Linear PCM.

• This receiver supports xvYCC transmission.
• This receiver supports the Control for HDMI 

function. For details, see “Control for 
HDMI” (page 62).

• An audio signal input to the HDMI IN jack 

is output from the speaker output jack and 
HDMI OUT jack. It is not output from any 
other audio jacks.

• Video signals input to the HDMI IN jack can 

only be output from the HDMI OUT jack. 
The video input signals cannot be output 
from the VIDEO OUT jacks or MONITOR 
OUT jacks.

• When you want to listen to the sound from 

the TV speaker, set “AUDIO FOR HDMI” to 
“TV+AMP” in the VIDEO menu (page 39). 
If you cannot play back multi channel 
software, set to “AMP”. However, the sound 
will not output from the TV speaker.

• The multi/stereo area audio signals of a 

Super Audio CD are not output.

• Audio signals (sampling frequency, bit 

length, etc.) transmitted from an HDMI jack 
may be suppressed by the connected 
component. Check the setup of the 
connected component if an image is poor or 
the sound does not come out of a component 
connected via the HDMI cable.

• Sound may be interrupted when the 

sampling frequency, the number of channels 
or the audio format of the audio output 
signals from the playback component is 
switched.

• When the connected component is not 

compatible with copyright protection 
technology (HDCP), the image and/or the 
sound from the HDMI OUT jack may be 
distorted or may not be output.

 

In this case, check the specification of the 
connected component.

• You can enjoy multi channel Linear PCM 

only with an HDMI connection.

• Set the image resolution of the playback 

component to 720p, 1080i or 1080p when 
you output 96 kHz multi-channel sound over 
an HDMI connection.

• You may need to make certain settings on the 

image resolution of the player before you 
can enjoy multi channel Linear PCM. Refer 
to the operating instructions of the player.

• Refer to the operating instructions of each 

component connected for details.

• We do not recommend using an HDMI-DVI 

conversion cable. When you connect an 
HDMI-DVI conversion cable to a DVI-D 
component, the sound and/or the image may 
not be output.