Sony STRDG720 Manual Do Utilizador

When you connect components to both digital 
and analog audio input jacks on the receiver, 
you can fix the audio input mode to either of 
them, or switch from one to the other, 
depending on the type of material you intend 
to watch.

You can also use the input buttons on the 
remote.

The selected audio input mode appears on 
the display.

Gives priority to digital audio signals when 
there are both digital and analog 
connections.

 

If there are more than one digital connection, 
HDMI audio signals have priority over 
COAXIAL and OPTICAL audio signals.
If there are no digital audio signals, analog 
audio signals are selected.

Specifies the analog audio signals input to 
the AUDIO IN (L/R) jacks.

• Some audio input modes may not be set up 

depending on the input.

• When the ANALOG DIRECT function is being 

used, the audio input mode is set to “ANALOG” 
automatically. You cannot select other modes.

 

You can reassign digital audio input that has 
OPTICAL or COAXIAL (SAT IN, DVD IN) 
signals to another input when they are not 
currently being used.
For example, to output the sound source for 
the DVD player using the OPTICAL IN jack 
on the receiver:
• Connect the optical output jack of the DVD 

player to the OPTICAL SAT  IN jack of the 
receiver.

• Assign “SAT OPT” to “DVD” in the 

 

“D. ASSIGN” setting.

“1-LEVEL” appears on the display.

V/v repeatedly to select 

b to enter the 

V/v repeatedly to select 

b to enter the 

V/v repeatedly to select a 

b to enter your