Sony STRDG720 Manual Do Utilizador

• Check the HDMI connection.
• You cannot listen to the Super Audio CD 

by connecting HDMI.

• Depending on the playback component, 

you may need to set up the component. 
Refer to the operating instructions 
supplied with each component.

• Check the HDMI connection.
• Depending on the playback component, 

you may need to set up the component. 
Refer to the operating instructions 
supplied with each component.

• Check the HDMI connection (page 20).
• Make sure “CONTROL FOR HDMI” is 

set to “CTRL ON” in VIDEO menu. 

• Make sure the connected component is 

compatible with the Control for HDMI 
function.

• Check the Control for HDMI settings on 

the connected component. See the 
operating instructions of the connected 
component.

• If you change the HDMI connection, 

connect/disconnect the AC power cord, or 
there is a power failure, repeat the 
procedures of “Preparing Control for 
HDMI function” (page 64).

• Make sure the TV is compatible with the 

System Audio Control function.

• If the TV does not have System Audio 

Control function, set the “AUDIO FOR 
HDMI” settings in VIDEO menu to
– “TV+AMP” if you want to listen to the 

sound from the TV speaker and 
receiver.

– “AMP” if you want to listen to the 

sound from the receiver.

• If you cannot listen to the sound of a 

component connected to the receiver
– Select the appropriate input when you 

want to watch a program on a 
component connected via HDMI 
connection to the receiver.

– Change the TV channel when you want 

to watch a TV broadcast.

– Select the component or input you want 

to watch when you watch a program on 
the component connected to the TV. 
Refer to the operating instructions of the 
TV on this operation.

• Change the input of the receiver to the 

HDMI input connected to the component.