PioneerPOS G24-LC Manual Do Utilizador
Chapter 3: AT Commands Reference
April 15, 2008
G24-L AT Commands Reference Manual
3-101
+MMAR, Motorola Mark As Read
This command handles changing the <stat> attribute of an SM in the G24-L memory location
<index>, preferred message storage <mem1>, from "REC UNREAD" to "REC READ".
(<mem1> is selected using the +CPMS command.) If the status change fails, +CMS ERROR:
<err> is returned.
<index>, preferred message storage <mem1>, from "REC UNREAD" to "REC READ".
(<mem1> is selected using the +CPMS command.) If the status change fails, +CMS ERROR:
<err> is returned.
The following table shows the +MMAR parameters.
Example
AT+MMGR=1
+MMGR: "REC UNREAD","+972544565034",,"04/11/04,09:48:36+08"
message text
OK
AT+MMAR=1
OK
AT+MMGR=1
+MMGR: "REC READ","+972544565034",,"04/11/04,09:48:36+08"
message text
OK
+CMSS, Send Message From Storage
This command sends a pre-stored message, written previously using the +CMGW command. The
<da>, <toda> parameters are optional. If a DA is given, the message is sent to that address.
<da>, <toda> parameters are optional. If a DA is given, the message is sent to that address.
Command
Type
Syntax
Response/Action
Remarks
Set
+MMAR=<index>
OK
or:
+CMS ERROR: <err>
Read
The Read command for +MMAR is
not defined, and therefore is not
supported by the G24-L. The G24-L
returns an error.
not defined, and therefore is not
supported by the G24-L. The G24-L
returns an error.
Test
The Test command for +MMAR is not
defined, and therefore is not supported
by the G24-L. The G24-L returns an
error.
defined, and therefore is not supported
by the G24-L. The G24-L returns an
error.
Table 3-61: +MMAR Parameters
<Parameter>
Description
<index>
Index of the message to be marked as read, in
the SMS memory.
the SMS memory.