Viewsonic WMG120 Manual Do Utilizador

ViewSonic Wireless Media Gateway

• The power is not connected. 

• Connect the power adapter to your AP and plug it into 

the power outlet.

IMPORTANT! Only use the power adapter that came 
with your Wireless Media Gateway. Using any other 
adapter may damage your Wireless Media Gateway.

• Make sure your Gateway is powered on.

• Check network connections.

• The computer you are using does not have a 

compatible IP Address. Be sure that the IP Address 
used on your computer is set to the same subnet as the 

. For example, if the 

 is set to 

192.168.1.1, change the IP address of your computer to 
192.168.1.15 or another unique IP Address that 
corresponds to the 192.168.1.X subnet.

• Press Reset on the back of the Gateway to revert to the 

default settings.