Viewsonic VS13789 Manual Do Utilizador

 

ViewSonic  WPD-100 

20 

To set authentication / encryption information for the access point. Please click 
‘Auth. \ Encry.’ tab: 
 

 

 
Here are descriptions of every setup item: 
 
Item Name 

Authentication  Select the authentication type of the wireless access point or 

wireless device you wish to connect. When you’re adding a 
profile from an existing access point or wireless device, 
authentication type will be selected automatically, and 
please do not change it. 

Encryption 

Select the encryption type of the wireless access point or 
wireless device you wish to connect. When you’re adding a 
profile from an existing access point or wireless device, the 
encryption type will be selected automatically, and please do 
not modify it. 

WPA 
Preshared 
Key 

Input WPA preshared key here. If encryption is not enabled, 
or you select ‘WEP’ as encryption type, this field will be 
disabled and grayed out. 

WEP Key 

You can select key type (Hexadecimal or ASCII) and input 
WEP key here. If encryption is not enabled, or you select 
‘WPA’ as encryption type, this field will be disabled and 
grayed out. You can set up to 4 WEP keys here.   
 
There are two types of WEP key: Hexadecimal and ASCII. 
For Hexadecimal key, you can input number 0-9 and 
alphabet a-f; for example, ‘001122aabbcc’; For ASCII key, 
you can input number 0-9 and alphabet a-z; for example, 
mywepkey12345.