Omega Vehicle Security 1500 Manual Do Utilizador

NetScan User’s Manual

ChartView Quick Start and Tutorial     2-9

 

 

 

Configure channels and alarms as follows.

 

 

◊ 

(14)  On ChartView’s Main Window, click on Setup in the  pull-down menu row.  The Setup pull-down

menu appears, allowing you to make more specific selections.

 

 
 

 

◊ 

(15)  Click on the  Channels & Alarms selection.  The Channel and Alarm Setup dialog box appears, similar

to that shown in the following figure.

 

 

 

◊ 

(16)   Enable the desired channels.  You can enable channels by double-clicking on the applicable channel’s

“On” column, obtaining “On” indicating enabled or “Off” indicating disabled.  You can also use a pull-
down list which appears for enable/disable.  See Chapter 4 if more detail is needed.

 

 

 

Channels set up for your display will be automatically enabled.  You can enable additional
channels for data acquisition.  These additional channels will not appear on ChartView’s
Main Window, but data from them will still be acquired.

 

 

 

◊ 

(17)  Click on the “Enable SpreadSheet Reading” button (see previous figure).  This activates the display

scanned data in the reading column.  Since we are in the Simulated Instrument mode, the Reading column
of the Analog Input SpreadSheet will now display simulated data.  Selecting the Enable SpreadSheet
Reading button again will freeze the Reading column’s display.